A locatable mineral refers to mineral deposits that can be mined through the process of making a mining claim on public lands.
One of the stipulations of filing a hardrock or placer mining claim is that the mineral deposits found in the area must be considered a locatable mineral. This typically includes most metallic mineral deposits and certain non metallic and industrial minerals.
The laws of a “locatable mineral” are set by the Mining Law of 1872 and its amendments and is a set of federal law governing which mineral deposits may be open for mining claim location.
WHAT DEFINES A LOCATABLE MINERAL?
A locatable mineral includes the following:
- It is recognized as a mineral by the scientific community or standard experts.
- It has been found on Federal lands open to mineral entry.
- Make the land more valuable for mining than for farming.
WHAT ARE CONSIDERED TO BE LOCATABLE MINERALS?
There are several locatable minerals available for acquisition through the General Mining Law of 1872 and its amendments. However, uncommon minerals are approved on a case-by-case basis based on project specific economics, making it difficult to put together a complete list of locatable minerals. A BLM Mineral Examiners handbook may be downloaded for more detailed information about this process.
Common locatable minerals include:
- Gold
- Copper
- Silver
- Lead
- Zinc
- Nickel
- Other metallic minerals
- Precious Gems
- Uranium
- Tantalum
- Mica
- Platinum
- Fluorspar
- Bentonite
WHAT ARE UNCOMMON LOCATABLE MINERALS?
Some mineral materials are also considered locatable minerals and subject to the same laws, if they are uncommon and possess a distinct and special value. These are determined on a case-by-case basis by the project economics and location. Some of these uncommon varieties of mineral material include:
- Block pumice having one dimension of 2 or more inches.
- Limestone of chemical or metallurgical grade or that is suitable for making cement.
- Gypsum suitable for the manufacture of wall board or plaster.
WHAT IF MINERALS ARE NOT LOCATABLE?
Minerals that are not locatable may be salable, which means the mining and use of these minerals require a sales contract with the BLM or a free-use permit. Salable minerals typically include widespread, low unit value materials such as sand, stone, and gravel. Sales contracts are typically required for commercial operations while free-use permits may be administered to government agencies or non-profit organizations. The disposal of these minerals may also be regulated.
Leasable materials are minerals that can be federally leased. These are generally awarded through a bidding process and are subject to a production royalty. Leased minerals are generally used for fuel, energy, or other chemical applications, such as oil, gas, oil shale, coal, geothermal resources, potash, sodium, native asphalt, solid and semisolid bitumen, bituminous rock, and phosphate. In some states, sulfur is also considered to be a leasable mineral.
ASK A QUESTION
If you are interested in claim staking services or would like to speak with a mining expert on a potential project, reach out! Our Rangefront experts are happy to help.
ABOUT THE AUTHOR
BRIAN GOSS
President, Rangefront Mining Services
Brian Goss brings over 20 years of experience in gold and mineral exploration. He is the founder and President of Rangefront, a premier geological services and mining consulting company that caters to a large spectrum of clients in the mining and minerals exploration industries. Brian is also a director of Lithium Corp. (OTCQB: LTUM), an exploration stage company specializing in energy storage minerals and from 2014 to 2017, he fulfilled the role of President and Director of Graphite Corp. (OTCQB: GRPH), an exploration stage that specialized in the development of graphite properties. Prior to founding Rangefront, Brian worked as a staff geologist for Centerra Gold on the REN project, as well as various exploration and development projects in the Western United States and Michigan. Brian Goss holds a Bachelor of Science Degree with a major in Geology from Wayne State University in Michigan.
You may also be interested in...
Annual Claim Renewals Updated for 2026: Mining Claim Maintenance & Assessment Information
Late summer is a critical time for the mining and exploration industry. The deadline for Annual Mining Claim Renewals is September 1, and it arrives fast. Whether you’re a small-scale prospector or managing dozens of claims, it’s essential to ensure your filings,...
Combining Drone and Ground Mag Surveys: More Data, Less Time in the Field
A magnetic survey is only as good as the data density behind it. Two survey platforms, flown and walked over the same ground on the same program, can double that density without doubling your budget or your schedule. That is the logic behind Rangefront's approach to...
Yukon Geophysical Surveys: Season Planning and Field Logistics
The Yukon exploration season is shorter than most project managers account for, and the margin for a poorly timed mobilization is close to zero. Between spring break-up, permafrost thaw cycles, and the onset of fall freeze, the usable field window for most ground...
How to Read an IP Pseudosection: Interpreting Chargeability and Resistivity Anomalies Before You Drill
A chargeability anomaly that looks like a porphyry target and turns out to be graphitic shale is a wasted drill hole, a budget hit, and a credibility problem in front of your board. Reading an IP pseudosection correctly before the rig mobilizes is one of the...
Mineral Exploration in the Abitibi Greenstone Belt: Geology, Deposit Types, and What to Expect in the Field
Image Source: https://www.sciencedirect.com/science/article/abs/pii/S016913682100247X The Abitibi Greenstone Belt produced more gold than almost any other Archean terrane on Earth, and the ground is still generating discovery-stage programs across northern Ontario and...
Beyond the Borehole: How 3D Geotechnical Modeling is De-Risking Modern Mine Design
The difference between a viable project and a costly oversight lies in the "digital twin" of the subsurface. Traditional 2D cross-sections, once the industry standard, are no longer sufficient for the complexities of modern resource extraction and the stringent safety...
Starting a Geology Career in Mining and Mineral Exploration
Graduating with a geology degree opens doors, but it can be hard to know which ones to walk through first. Many new graduates want work that's hands-on, technically meaningful, and connected to real projects, but translating that into an actual job search takes some...
Soil Sampling vs. Magnetic vs. Gravity Surveys in Canada’s Covered Terrain
Canada is home to some of the world’s most promising mineral districts, but many of those opportunities lie beneath cover rather than in clean, exposed outcrops. Across much of the country, exploration teams work in terrain shaped by glaciation, transported...
2026 Regulatory Shifts in Geophysics & Geotechnical Reporting in Canada
For Canadian junior and major exploration firms, the "Qualified Person" (QP) is under more scrutiny than ever. As we move into 2026, the integration of geophysical data into NI 43-101 technical reports has evolved from "supplemental" to "essential." In an era of...
How Geophysical Surveys Support Mineral Exploration in Canada’s Remote and Covered Terrains
Canada is one of the most mineral-rich countries in the world, but much of that potential lies in places that are difficult, expensive, or logistically complex to explore. From vast stretches of the Precambrian Shield to sediment-covered basins and northern regions...
Gravity Surveys in Mineral Exploration: How They Work, What They Reveal, and Why They Matter
In mineral exploration, every decision hinges on understanding what lies beneath the surface before drilling begins. Gravity surveys provide a precise, cost-effective way to map subsurface density variations and uncover geological structures that may host valuable...
Why Magnetic and Gravity Surveys Are Essential for Mineral Exploration in Canada
Canada is one of the most geophysically explored countries in the world. With vast mineral potential spread across the Precambrian Shield, structurally complex greenstone belts, sedimentary basins, and remote northern terrains, Canadian exploration has long relied on...