Soil sampling and rock chip sampling are two early-stage sampling procedures in prospecting. Rock chip sampling typically occurs on outcroppings, or areas of exposed bedrock, while soil sampling will occur in areas where there are no outcroppings, with the goal of sampling mineralization below the surface.
The purpose of soil sampling and rock chip sampling in the mining and exploration industries are to help determine the existence and extent of mineralization in a prospective area. It is typically an early step in the mineral exploration process that will later help to inform drilling exploration.
WHAT IS SOIL SAMPLING?
Soil sampling is the process of extracting, labeling, and testing soil to determine its mineral makeup. These tests are used to measure the concentration of certain metals in the soil, helping to infer the existence and extent of mineralization in an area. They may also be used to inform drilling for further investigation. Soil samples are often taken by hand-held augers, handled picks, or garden spades, making the process relatively non-intrusive.
To be effective, soil sampling should be done strategically in an area, with locations chosen based on the increased probability of mineralization’s and at strategic points to reasonably cover the territory. Geologists may use historical mineral occurrences, mapping or prospecting, and geophysical surveys to guide a soil sampling location strategy.
Samples must be consistently labeled using GPS coordinates so data may be accurately attributed to the correct area. It’s also important to avoid cross-contamination, which can occur if jewelry comes in contact with the soil, tools have remnants from previous samples on them, etc.
WHAT IS ROCK CHIP SAMPLING IN MINING & EXPLORATION?
Rock chip sampling is a process of mineral exploration in which rock chip samples are taken from outcroppings, or exposed bedrock. These rock chips are then sent to a laboratory to determine their mineral makeup to help inform mineralization in the area.
There are different methods of rock chip sampling, each of which has different purposes and varying levels of accuracy.
- Chip Sampling. Chip sampling is used in early mineral exploration to determine if an area is of interest. In this process, several small rock fragments are collected over an area using a geologist’s hammer and chisel. These chips are composited into one sample and sent to a laboratory for testing. Typically, a geologist will high-grade this sample, looking for rock chips that have the best chance of containing the sought-after element. This method of testing isn’t used to provide a reasonable representation of the mineral makeup and abundance in the area, but rather to determine whether the area is of interest.
- Chip-Channel Sampling. This method of rock chip sampling is used when an interval that should be sampled can be identified in exposed rock. It attempts to define the approximate width and grade of the zone and the adjacent rocks by taking small, contiguous rock chip samples along the channel.
- Sawn-Rock Channel Sampling. The most accurate and objective form of rock chip sampling, sawn-rock channel samplings are cut from rock walls of a zone to test any mineralization. This type of sampling is most often used in a mine environment.
FINAL THOUGHTS
The use of soil sampling and rock chip sampling are important to the early exploration of a prospective mining area, helping to inform the mineral makeup of an area to determine whether it merits further exploration. For more information about rock chip or soil sampling services, please reach out to Rangefront to speak with an expert.
ABOUT THE AUTHOR
BRIAN GOSS
President, Rangefront Mining Services
Brian Goss brings over 20 years of experience in gold and mineral exploration. He is the founder and President of Rangefront, a premier geological services and mining consulting company that caters to a large spectrum of clients in the mining and minerals exploration industries. Brian is also a director of Lithium Corp. (OTCQB: LTUM), an exploration stage company specializing in energy storage minerals and from 2014 to 2017, he fulfilled the role of President and Director of Graphite Corp. (OTCQB: GRPH), an exploration stage that specialized in the development of graphite properties. Prior to founding Rangefront, Brian worked as a staff geologist for Centerra Gold on the REN project, as well as various exploration and development projects in the Western United States and Michigan. Brian Goss holds a Bachelor of Science Degree with a major in Geology from Wayne State University in Michigan.
You may also be interested in...
Common Land Staking Questions
Common Land Staking Questions Although the perception of prospecting and mining can sometimes be cartooned as “old-fashioned,” the reality is that land staking and mining are alive and well. While during the late 1800s, mining focused primarily on gold, mining...
What is a Locatable Mineral?
A locatable mineral refers to mineral deposits that can be mined through the process of making a mining claim on public lands. One of the stipulations of filing a hardrock or placer mining claim is that the mineral deposits found in the area must be considered a...
Land Staking: What it Means & How it Works
Put away your flag; modern land staking looks nothing like it does in cartoons or historical motifs. Instead of a flag asserting instant ownership over a tract or parcel of land, modern land staking is more likely to refer to the asserted ownership over a land’s...
Why is a Feasibility Study Important in Mining?
During your prospecting projects, you may reach a certain point where you have the need to complete a feasibility study. If you’ve never been to this stage of the mineral exploration process before, you may be wondering what, exactly, a feasibility study is and why it...
Why Choose a Geology Job Through Rangefront?
Rangefront Mining Services provides staffing services to mining, exploration, and geological sites across the country. This means we have first-hand, and often exclusive access to geology job openings. However, the benefits to choosing a geology job through Rangefront...
Common Types of Mining Jobs
Mining has long been a steady career path, with worldwide needs for minerals and metals steadily growing as manufacturing, energy, and technology continue to boom. In the 21stCentury, this is no exception even as the world begins a broader transition to green energy....
What is AML Hazard Fencing & Why is it Important?
If you have recently received an Abandoned Mine Lands (AML) hazard notice, you may be wondering exactly what AML hazard fencing is and why it is important. Until recently, prospectors were allowed to leave a mine site without being required to leave the property in a...
8 Steps of Mineral Exploration
Mineral exploration is the process of seeking concentrated deposits of minerals for the purpose of mining these minerals for economic benefit. HOW IS MINERAL EXPLORATION DONE? While the exact process of mineral exploration depends on the area, team, and resources,...
How to Vet a Mining Services Company
Finding the right mining services partner is an important part of most mining projects. Taking the time to vet your options will help your project go as smoothly as possible. It helps to ensure the company has the expertise to complete your project efficiently and...
What to Look for in a Mining Consulting Services Company
If you are anticipating or currently undergoing a mining project, you will likely require the help of a mining consulting services company at some point. The quality of this company can help to make, break, accelerate, or slow your progress on the project. 4 QUALITIES...
What are Geophysical Services?
Geophysical services are services that pertain to the collection, interpretation, and mapping of the physical properties of the surface and subsurface (below-ground) of an area. Some of the properties measured include gravity, magnetics, seismic refraction/reflection,...
What are Mining Services?
Mining services are typically defined in two different ways. The first is for physical mining operations, which includes the extraction of minerals, metals, and other material from the earth for industrial and commercial use. Mining services can also be defined as...